The A5+ premium powered speakers are a complete home music system with bold stereo sound that fills any room. Wired or wireless connections including aptX-HD Bluetooth from your phone, tablet or computer, or good old analog from that vintage turntable or 80’s Sony tape deck.
Extended-Range Wireless That Works
The ultimate wireless music system that seamlessly works with all your apps, music, and devices. No matter how you listen, A5+ Wireless has you covered.
Tidal, Spotify, Pandora…all your favourite streaming apps play instantly.
Benefits
Simple. No Hassle. Easy to Use.
The A5+ Wireless Speakers are bookshelf speakers packing a big sound that fills any room.
No network setup, passwords to enter, or buttons to push. Setting them up is so easy you’ll be rocking in no time.
Keep your music fun, easy, and sounding great.
Fills any Room
Clear, full and powerful audio that fills any room. The A5+ Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, high-fidelity aptX-HD Bluetooth, and built-in power amps wrapped in precision tuned, hand-crafted cabinets. Perfect for any size space.
Analog, Baby!
Audioengine wireless speakers are special. Their traditional analog amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands.
A whole new music experience, guaranteed.
Audioengine DS2 Desktop Speaker Stands
The Audioengine DS2 Desktop Stands were designed to make the best of a desktop setting by first and foremost aiming the speakers higher. This brings the tweeters closer to ear level, and reinforces the frequencies that make up your music’s sound stage. The DS2 Desktop Stands elevate your A5+, P4, HD4, HD6 or similar-sized speakers.
Power Output
150W peak power total (50W RMS / 75W peak per channel), AES
Inputs
3.5mm stereo mini-jack, RCA L/R
Input Voltages
115/240V, 50/60Hz manually switchable
Amplifier Type
Dual Class AB monolithic
Drivers
5″ aramid fiber woofers, 3/4″ silk dome tweeters
SNR
>95dB (typical A-weighted)
THD+N
<0.05% at all power settings
Crosstalk
-50dB
Frequency response
50Hz-22kHz +/-1.5dB
Input impedance
10K ohms unbalanced
Protection
Output current limiting, thermal over-temperature, power on/off transient protection, replaceable external main fuse
Power Consumption
Idle: 10W
Mute: 6W
Sleep: 4W
Internal D/A converter
AKM AK4396
Input bit depth
24-bits upsampled
Bluetooth receiver type
Bluetooth 5.0 audio
Supported codecs
aptX HD, aptX, AAC, SBC
Wireless operation range
Up to 100ft (30m) typical
Input data rate
Determined by Bluetooth
Wireless latency
~30 milliseconds (ms)
Dimensions (each speaker HWD)
Left – 10.75″ (27cm) x 7″ (18cm) x 9″ (23cm)
Right – 10.75″ (27cm) x 7″ (18cm) x 7.75″ (20cm)
Weight (LEFT speaker)
15.4 lbs (7 kg)
Weight (RIGHT speaker)
9.6 lbs (4.4 kg)
Shipping weight
31 lbs (14 kg)
Shipping box dims
15″ (38cm) x 22″ (56cm) x 11.5″ (29cm)
Satin Black Paint
Hi-Gloss White Paint
Solid Carbonized Bamboo
Operating temperature: 32 degrees F to 95 degrees F
Non-operating temperature: -4 degrees F to 113 degrees F
Relative humidity: 5% to 95% non-condensing
1/2″ (13mm) thick MDF cabinets
5″ (130mm) aramid fiber woofers with advanced voice coils
3/4″ (20mm) silk dome tweeters with neodymium magnets
Toroidal power transformer
(1) Remote control
(1) Antenna
(1) Speaker wire (16AWG), 4 meters (~13ft)
(1) Detachable AC power cord
(1) Mini-jack audio cable, 2 meters (~6.5ft)
(1) RCA audio cable, 2 meters (~6.5ft)
(2) Microfiber speaker bags
(1) Microfiber cable bag
(1) Quickstart guide
(1) Product line brochure
© 2023 Australia Hi Fi.
