Audioengine D2R 24-Bit Wireless Add-on Receiver

The D2R Add-on Receiver is an expansion kit for your D2 24-bit Wireless DAC.

You can add up to 2 D2R add-on Receivers for a total of 3 zones. It connects wirelessly to your existing D2 setup, and can output 24bit/96KHz digital or analog audio to your high end system or powered speakers. Add sound to an additional room, or even make your Audioengine S8 Powered Subwoofer wireless.

DAC type
Dual Mode USB and Optical (SPDIF) wireless DAC

Outputs
RCA Stereo/Optical (SPDIF)

D/A converter
PCM1792A

Optical receiver
AK4117

Full-scale output
2.0V RMS

Output impedance
100 ohms

Power source
Included external supply

SNR
(DC to 20 kHz) >115dB

THD+N
(1kHz FS 96kS/s) >0.0015%

Crosstalk
<-85dBFrequency response
10Hz-30KHz (+/- 0.5dB)

Wireless range (typical)
>100ft

Latency
<20msProduct dimensions
4.75×5.5×1″

Shipping weight
4lbs (2.0kg)

Shipping box dimensions
15x9x5″

Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing

Included accessories
RCA cable, 6.5ft
Power adapter with detachable AC cord
Microfiber bag
Setup Guide

D2 DAC
The D2 Receiver utilizes the PCM1792 DAC, widely know for it’s low noise and high fidelity. Due to the PCM1792’s high signal-to-noise specs and the added benefit of triple redundancy power source conversion and filtering, the D2 presents impressive low noise and low distortion characteristics.